Become ASME A17.3 Compliant Before December 31, 2023

The State of Florida Has Adopted the ASME A17.3-2015 Safety Code.
The Deadline for Door Lock Monitoring is soon approaching.

What is the change and how to avoid code violation?

A17.3-2015 is a retroactive code adopted by the State Of Florida. This requires all elevators within the State of Florida to be in compliance with the above code by December 31, 2023. A Door Lock Monitoring (DLM) system monitors the position and state of the elevator doors and removes the power from the elevator in the event of a faulty or bypassed door circuit.

Why is it important to take action?

If you have elevators manufactured after 2000, they may have a DLM system that needs activation or can be connected to a Door Lock Monitoring device. Elevators manufactured prior to 2000 require upgraded equipment or full modernization. Taking too long to act may result in long lead times, violation of the State laws and increased pricing to complete the installation.

ESI offers a UL certified Door Lock Monitoring Solution that works well with almost all types of controllers made by different manufacturers.

ESI offers a UL certified Door Lock Monitoring Solution that works well with almost all types of controllers made by different manufacturers.

Our solution comes with installation schematics and technical instructions to allow seamless integration with your client’s existing controller.

With more than 8000+ successful installations of Door Lock Monitoring solutions in New York and Florida, we are confident we are ready to meet your Door Lock Monitoring requirements.

HOW IT WORKS:

  • Monitors for short circuits across door locks and car gate switches
  • Tracks door position
  • Prevents the car from running when failure modes are detected

* The units work with 120/230VAC or VDC. For other signal voltages, please call the factory.
* Depending on the configuration the actual product maybe different from the image shown.

THREE MODELS

  • DGMON400-F (FRONT)
  • DGMON400-R (FRONT/REAR)
  • DGMON400-S (WALK-THROUGH)

Contact Us

PROJECT HIGHLIGHT

The most comprehensive and adaptable Door Lock Monitoring Solution.
The States of Florida approves ESI DLM for State Buildings. As the States of Florida sought a solution for their facilities across the state. TEIGroup-Florida partnered with Elevator Systems (ESI) to deliver the solution with the most experienced and adaptable system across all controller platforms.
The TEIGroup Team continues to install and implement the ESI DLM solution across a wide range of legacy proprietary and non-proprietary controls. With nearly 10,000 units installed across the country, ESI continues to provide the most affordable solution with a simplistic and comprehensive approach to all installations, to adhere to compliance of ASME A17., Section 3.10.12 (Door Lock Monitoring). This requirement ensures that an elevator will not operate if the hoistway door interlock or car door gate switch circuitry were either bypassed or failed in a way that renders the circuitry bypassed.
Contact our ESI team at Elevator Systems for your next project.

Helpful Resources
ASME A17.3-2015 3.10.12 System to Monitor and Prevent Automatic Operation of the Elevator with Faulty Door Contact Circuits

8000+ Elevators

Upgraded using Elevator Systems’
compliance solutions.

10 Business Days

For manufacturing and assembly of
standard models shown.
(*After receiving the complete data)

Request A Quote Form

Contact us for consultation 516.239.4044

About Elevator Systems

Contact Us

Address